Lowrance electronic X51 manual Attach motor mounting bracket to transducer

Bolt Internal tooth washer TMB-S bracket

Nut

Flat washer

Attach motor mounting bracket to transducer.

2.Slide the adjustable strap supplied with the TMB-S through the slot in the transducer bracket and wrap it around the trolling motor. Position the transducer to aim straight down when the motor is in the water. Tighten the strap securely.

3.Route the transducer cable alongside the trolling motor shaft. Use plastic ties (not included) to attach the transducer cable to the trolling motor shaft. Make sure there is enough slack in the cable for the motor to turn freely. Route the cable to the sonar unit and the transducer is ready for use.

Partial fish arches

Transducer aimed	Transducer aimed
too far back	too far forward

Full fish arch

Proper transducer angle

Transducer angles and their effects on fish arches.

11