Lucent Technologies 108355140 manual Modifying the Time Interval Between Outcalling Attempts

3.Do one of the following:

■Press *#to accept the current start time.

■Enter the start time using the 24-hour format of HHMM (where HH represents the hour and MM represents minutes), followed by #.

Example: Enter 1930#for the start time of 7:30 p.m.

The prompt says, “Enter Outcalling end time in the format of... To skip, press #.”

4.Do one of the following:

■ Press to accept the current end time.

■Enter the end time using the format shown in Step 3.

The system plays back the start and end time you have entered.

5. Either:
■ Press	to approve the schedule.

■Press 1to re-enter the schedule. Return to Step 3.

Modifying the Time Interval

Between Outcalling Attempts

The time interval is the number of minutes (from 5 to 99 minutes) the system waits before it tries another outcall. The default is 15 minutes.

1.Press 6to specify the time interval.

The system plays the current time interval between attempts. It also plays,

“The amount of time the system waits between attempts can be from 5 to 99 minutes. Please enter the number of minutes followed by #. If finished, press *#.”

2.Enter the time interval in minutes followed by #.

16