Lucent Technologies 8434DX, 8403, 8411, 8410 PassageWay and Analog Adjunct Status Indications on

Models: 8410 8434DX 8411 8403 8405

1 31
Download 31 pages 1.6 Kb
Page 22
Image 22

WARNING: Do NOT connect the Analog Adjunct to the wall jack. It will cause equipment damage.

NOTE: When an 8411 voice terminal is administered at a DEFINITY G3V4, Issue 3, switch, the voice terminal must be administered to use the appropriate analog telephone line. For more information on administration of the 8411, see “Switch Administration” later in this manual.

PassageWay and Analog Adjunct Status Indications on the 8411

The system manager may choose to administer Buttons #9 and #10 on the 8411 voice terminal, the last two buttons in the second column as shown in Figure 10, so that the lights next to these buttons show the status of the PassageWay connection (the PC can be connected to the RS-232-D jack on the rear of the 8411) and the status of the Analog Adjunct (this adjunct equipment can be connected to the Analog Adjunct jack also on the rear

of the 8411).

NOTE: Button #9 is always used to monitor PassageWay, and Button #10 is always used to monitor the status of the Analog Adjunct.

IMPORTANT: At any time, you may use the Diagnostic feature (press Shift and then Test to enter Diagnostic Mode) to view the status light indications (next to Buttons #9 and #10) of the PassageWay and the Analog Adjunct connections.

These lights are used for

PassageWay status

1

2

3

4

5

6

7

8

9

10

These lights are used for

Analog Adjunct status

FIGURE 10: The location of Buttons #9 and #10 on the 8411

15

Page 22
Image 22
Lucent Technologies 8434DX, 8403 PassageWay and Analog Adjunct Status Indications on, Location of Buttons #9 and #10 on