INSTALLING YOUR VOICE TERMINAL
IMPORTANT: For a fuller description of installing the 8400-Series voice terminals and procedures on administering these sets and programming such options as enabling/disabling the speakerphone or one-way speaker, enabling/disabling the Mute function, selecting ringing preference, or selecting handset and speaker volume control, see the 8400-Series Voice Terminals Instructions for Installation, Switch Administration, and Programming the Options, 555-015-725. (This document can be ordered from the Lucent Technologies BCS Publications Center at 1 800 457-1235.)
Distance Limitations
In 4-wire operation, the voice terminal must be within 5,000 feet of the PBX using 22-gauge or 24-gauge wire, and within 4,000 feet of the PBX using
26-gauge wire.
In 2-wire operation, the voice terminal must be within 5,500 feet of the PBX using 22-gauge wire, within 3,500 feet of the PBX using 24-gauge wire, and within 2,200 feet of the PBX using 26-gauge wire.
Auxiliary Power
In both a 4-wire or 2-wire configuration, most 8400-Series voice terminals are phantom powered from the PBX. However, you will need auxiliary power in the following instances:
•If you are using an 8411 or 8434DX voice terminal (These sets require auxiliary power.)
•If you have an 801A Expansion Module (used ONLY with the 8434DX voice terminal connected to a DEFINITY® Communications System G3V3.3 or later switch)
•If there is an attached adjunct equipment, such as an S201A Speakerphone
The following power supplies can be used with the 8400-Series voice terminals:
Stand-alone 1151A1 Power Supply (PEC: 2404-010;
Comcode: 107785693) and 1151A2 Power Supply with Battery Holdover
(PEC: 2404-012; Comcode: 107785339)
Stand-alone MSP-1 (PEC: 2404-010; Comcode: 406743419)
1145A Bulk Power Supply (PEC: 2404-011;
Comcode: 106448939)
Battery for the 1145A (2.5 amp per hour battery) (Comcode: 106448921)
