Chapter 10 Troubleshooting
This chapter describes problems you may encounter while using PC170. If you have questions, please refer to related chapters and follow all the suggested solutions. If the problem still occurred, please contact our distributors or service center.
No. | Problems |
| Solutions | ||
1 | Boot without power | Make sure you have plugged in the power cord. | |||
|
| signal |
|
|
|
2 | There is no image | 1. | Check the power. | ||
|
| output from PC170 | 2. | Check all cable connections. Refer to Chapter 4 | |
|
|
|
| Installation and Connections in this manual. | |
|
|
| 3. Check the [Source], refer to 7.2 I would like to switch | ||
|
|
|
| image sources of Chapter 7 Descriptions of major | |
|
|
|
| functions. | |
|
|
| 4. Check the settings for the source of the projector. For | ||
|
|
|
| the appropriate input selection of the projector, refer to | |
|
|
|
| the projectors user manual. | |
|
|
| 5. Check if DIP Switch is properly set. Refer to Chapter 9 | ||
|
|
|
| DIP Switch Settings for related settings. | |
3 | Unable to focus | Probably the document is too close. Press [ZOOM | |||
|
|
| remote control or control panel. Or pull away the lens | ||
|
|
| from the document to increase the distance, and then press | ||
|
|
| the [FOCUS] button on the right side of the lens. | ||
4 | The image is | Check the Auto Image setting of your projector. Please refer | |||
|
| incomplete | to the user manual of the projector or check for the DIP | ||
|
|
| SWITCH settings. | ||
5 | Lumens Document | Lumens Document Camera, Podium View™ and other | |||
|
| Camera, Podium | applications cannot be executed simultaneously. Only one | ||
|
| View™ and other | application can be executed at a time. Please close the | ||
|
| applications cannot | currently running applications and then execute the | ||
|
| be used | application to be used. | ||
|
| simultaneously |
|
|
|
6 | When the unit is | Please make sure the arm lamp is set to “OFF”. For the | |||
|
| turned on, the | |||
|
| auxiliary floodlight | like to turn on/off the lamp of Chapter 7 Descriptions of | ||
|
| do not light | major functions. | ||
7 | PC170 fails to store | 1. Check to see if the stored data have reached the | |||
|
| images or react |
| maximum size of the USB device (priority) or internal | |
|
|
|
| memory. | |
|
|
| 2. Please make sure if the Capture function is set to | ||
|
|
|
| Continuous mode or the time for capture is set to be | |
|
|
|
| long. For the related setting, refer to 7.11 I would like | |
|
|
|
| English - 40 | |
|
|
|
|
|
|
