Lynx L-325 user manual Configuring Your Computer, Windows

Configuring Your Computer

Prior to accessing the router through the LAN port, note the following necessary configurations—

•Your PC’s TCP/IP address: 192.168.1.__( the last number is any number between 3 and 254)

•The router’s default IP address: 192.168.1.1

•Subnet mask: 255.255.255.0

Below are the procedures for configuring your computer. Follow the instructions for the operating system that you are using.

Windows 2000

1.In the Windows taskbar, click on the Start button and point to Settings, Control Panel, and Network and Dial-up Connections (in that order).

2.Click on Local Area Connection. When you have the Local Area Connection Status window open, click on Properties.

3.Listed in the window are the installed network components. If the list includes Internet Protocol (TCP/IP), then the protocol has already been enabled, and you can skip to Step 10.

4.If Internet Protocol (TCP/IP) does not appear as an installed component, then click on Install.

5.In the Select Network Component Type window, click on protocol and then the Add button.

6.Select Internet Protocol (TCP/IP) from the list and then click on OK.

7.If prompted to restart your computer with the new settings, click OK.

4-Port ADSL Router Lynx L-325	8
User Manual
Version 1.0
Document #: BD-AU0007-10