Lynx L-325 Installing the Router, Connect the ADSL Line and Telephone, Connect the Power Adapter

Installing the Router

Connect the ADSL Line and Telephone

An RJ-11 cable will be connected to the wall phone jack and the line-end of the splitter. Connect another RJ-11 phone cable from the modem-end of the splitter to the port labeled “line” on the router. A third RJ-11 phone cable will be needed to connect the telephone to the phone-end of the splitter.

NOTE: See connections on the installation diagram.

Connect the PC to the Router

Use the Ethernet cable to connect your computer directly to the router. Connect one end of the Ethernet cable to one of the ports labeled LAN on the rear panel of the router and connect the other end to the Ethernet port of your computer. Attach any additional PCs to the router using RJ-45 cables to the port labeled LAN on the rear panel of the router.

Connect the Power Adapter

Complete the process by connecting the AC power adapter to the POWER connector on the back of the device and plug the adapter into a wall outlet or power strip. Then turn on and boot up your PC and any LAN devices, such as hubs or switches, and any computers connected to them.

4-Port ADSL Router Lynx L-325	6
User Manual
Version 1.0
Document #: BD-AU0007-10