Page 12 | MNCX/MNCXS Owners Manual | |
|
|
|
The MNCXS system may be connected two ways depending on the amplifier used with the system. The major difference is the subwoofer connections.
1.An amplifier with a subwoofer output connection, usually an RCA type connector would be the preferred connection when used with the MNCXS subwoofer. A shielded audio cable is required for this setup with a Y- adapter connecting the audio cable to “Left and Right Line Level Inputs” on the subwoofer.
2.The other option requires the front left and right speaker cables be routed from the amplifier through the subwoofer to the speakers. The wires from the amplifier should be connected to the “Speaker Level Inputs” and the cables going to the speakers should be connected to the “Speaker Level Outputs” on the subwoofer.
IMPORTANT! Make sure there are no loose strands of wire touching each other across the speaker or amplifier terminals. This can create a short circuit and damage your electronics.
Refer to the PSW112 Subwoofer Owners Manual for additional information on setting up your subwoofer.
Plug your amplifier or receiver in, turn it on, and enjoy your new music system.
