M&S Systems | Page 7 | |
|
|
|
2.Pull the ball/shaft (C) out of the wall bracket (D).
3.Slide the molded nut (B) onto the ball/shaft (C) with threaded opening facing the ball, and thread on the metal nut (A) all the way onto the ball/shaft (C) with the nut’s (A) “knurled” surface facing away from the ball.
4.Screw the ball/shaft (C) into the threaded insert on the back of the speaker cabinet (F) until it is fully seated against the bottom of the insert. Please refer to page 9 for information on mounting your speakers on the ceiling.
