M&S Systems WG150C, WG100W, WG150W owner manual h i g h e s t d i r e c t i o n a l

FIGURE 5

tweeter horn

crease position

FIGURE 6

FIGURE 7

h i g h e s t d i r e c t i o n a l

response in		this
direction.
See	figure	5. If
you	want	to
disperse		the

sound in a 360-

degree	pattern
y o u	m u s t
position	the line

in the tweeter in

ahorizontal position.

See figure 6. The combination of switch settings allow you to boost and cut bass and treble +/-3dB. Adjust the speaker level to accommodate for room acoustics.

Step 7. Divide each adhesive bead strip in half. (Adhesive bead strips are in the clear self-closing bag). Place strips on the edge of the grille as shown in figure 7. Reinstall the grille on the speaker.

Step 8. Adhere the WG Series logo to the grille with the pressure sensitive tape.

Repeat the steps for the second speaker.

Page 10