M&S Systems WG150W, WG100W, WG150C owner manual Crease position

Tweeter horn

the baffle using the 6 screws provided. DO NOT OVERTIGHTEN THE SCREWS, the screws should on only be tight enough to secure the speaker.

Step 6. After the speaker is mounted, adjustments to the swivel tweeter (small speaker) can be made by either directing the sound visually or by using a musical source to determine the best sound coverage for the listening area. To position the tweeter, press at the outside edge of the tweeter housing

(DO NOT PRESS DIRECTLY ON THE CONE). Note the crease in the asymmetrical tweeter provides the highest directional response in this direction. See figure 11.

If you want to disperse the sound in a 360-degree pattern you must position the line in the tweeter in a horizontal position. See figure 12.

The combination of switch settings allow you to boost and cut bass and treble +/- 3dB. Adjust the speaker level to accommodate for room acoustics. See figure 13.

Crease position

FIGURE 11

Page 14