WavOut S/PDIF*
These faders control the volume level of the audio stream output from your DAW software. These faders have no effect on the actual S/PDIF output level.
*Note: on the Mac this is labeled SW Out S/PDIF.
H/W in S/PDIF
These faders control the mixer level output of the incoming audio stream that is coming from your S/PDIF digital Inputs.
H/W in 1/2
These faders control the volume level of the audio stream output that is coming directly from your Analog Inputs 1 & 2.
Patchbay/Router Page
The Patchbay/Router page provides output routing options for the Audiophile 192’s S/PDIF outputs.
Available sources are:
<WavOut S/PDIF* – The audio stream is output from your DAW application, as assigned to the Audiophile 192’s S/PDIF outputs. The output level is controlled within your DAW software.
*Note: on the Mac this is labeled SW Out S/PDIF.
<S/PDIF In – The audio input from the Audiophile 192’s S/PDIF inputs (direct monitor).
<S/PDIF In (L/R Rev.) – The audio input from the Audiophile 192’s S/PDIF inputs, with Left and Right channels reversed.
<H/W In 1/2 – The audio inputs from the Audiophile 192’s Analog inputs.
7
AP192_QS_ML2.indd 7
10/28/04 1:53:14 PM
