3
Break-Out Box Front Panel:
1.Analog OUTS 1-4: These jacks output analog audio to a variety of external sources. Each jack is 1/4” TRS (Tip-Ring-Sleeve) and is compatible with 1/4” TRS (balanced) or TS (Tip-Sleeve unbalanced) connections.
2.Analog INS 1-4: These jacks input analog audio from a variety of external sources. Each jack is 1/4” TRS (Tip-Ring-Sleeve) and is compatible with 1/4” TRS (balanced) or TS (Tip-sleeve unbalanced) connections.
Break-Out Box Back Panel:
3.Host Cable connector: This 15-pin D-sub connector is used to attach the external break-out box to the PCI host card, using the supplied host cable.
PCI Host Adapter Card:
4.Host Cable connector: This 15-pin D-sub connector attaches to the supplied host cable to allow communication between the PCI host card and the break-out box.
Quick Guide to Getting Started
Here is a list of the steps required to get your Delta 44 up and running:
1.Physically install the card in your computer and connect it to the Delta 44 break- out box (see ‘Hardware Installation’).
