!
33
Picture of the System Setting Menu
See screen shot at right:
DATE and TIME are used to modify the current system date and time;
after the modification reserve the change b y selecting SAVETIME; in
HDDFULL i f selecting OVERWRITE system covers the previous
recording files; RECORDLEN can set the len gth of each recording
file(15 mins, 30 mins, 6 0 mins)Note: 15 minutes is suggested.
COMMCTRL can Activate the communication control protocols. The
existing comm control protocols are:
MODEM - Dial-up connection through modem.
AB- matrix control
DH Keyboard control
NONE upgrading system through serial port
Note: System time shall NOT be changed freely; otherwise it
would cause the malfunction of recording search.
Select the corresponding channel in CH . In WEEK the letter of each
day is chosen, when the letter displays are highl ighted. SLOT1 and SLOT2
express the timed recording period of th e current channel. SLOT2 should
be after the ending time of SLOT1. The setting range is 00:00-24:00
STATE ON means the time setting is on. OFF means the time setting is
OFF.
Note: 1: If you need to record all day long, set SLOT1 as 00:00-24:00
& state is on; set SLOT2 as off. 2: When setting time in WEEK,
several days can be set at the same time.
When Reviewing a certain channel’s timing, only the current day will
be highlighted.
Schedule
6.4
.3 Syste
m
S
etting
DATE 10-28-2003
FORMAT MM-DD-YYYY
TIME 12:22:01
FORMAT AM/PM SAVETIME
INTERVAL 005 SEC
HDDFULL OVERWRITE
RECORDLEN 15 MIN
REMOTEADDR 108
COMMCTRL NONE
SAVE CANCEL
General