￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

 

 

1. Setting up the client end

No special software is needed to install on the DVR, PC or other devices in order to access DVR using the IE browser. If the IE responds back “Page Cannot Be Displayed” or “Server not Found”, check your network connection carefully.

2. Login and logout

Please input the IP address of the DVR in the address column of the browser. Take the DVR’s IP address: 192.168.0.168 as an example: Input http://192.168.0.168. Note: The first time you visit this DVR the system will pop up the dialogue box to ask whether you accept ActiveX or not, and please choose Yes, then the system will install the software automatically.

On the remote monitor display, there is a monitor video window, with selection choices: config(system setting)￿Assistant(assistant setting) and so on.

login￿logout￿search,

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

39

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿!￿

Page 39
Image 39
Mace DVR1604RW, DVR0404RW, DVR0804RW manual Setting up the client end, Login and logout