1.Installation Environment
-An UPS (Uninterrupted Power Supply) with power surge protection is strongly recommended for DVRs and all associated devices (routers, DSL modems, etc)
-Avoid extreme heat
-Avoid direct sunlight
-Avoid excessive humidity
-Maintain horizontal mounting
-Avoid excessive vibrations
-Do not stack other devices on top of the DVR
-Operate in well ventilated place, do not block the cooling fan
2.Open Product Box and Verify Contents
Check for the following accessories:
-One power cord
-One hard disc Ribbon Cable
-One operation manual
-One CD for utility software (normally it is not needed).
-One remote control unit
-Two AAA batteries
3.Before
-Make sure the orange tab is set to 110V at the back of the DVR power supply
-Be sure the UPS power supply is properly connected
-Be sure to plug power cord into a reliable 110 VAC power source
4 |
