Model 70 Pocket PC User’s Guide

Setting a Password

Password security is provided to help protect against unauthorized use of your Pocket PC. For immediate protection, we recommend setting up password security through the Password utility in the Settings of your Pocket PC as soon as possible. If set, your login password must be entered each time you turn on your Pocket PC.

Choose a password that is easy to remember. If you forget your password, you must perform a full reset to use your Pocket PC. A full reset restarts your Pocket PC and removes all information that was stored in memory, such as your data files and your system settings.

To set your login password

1.Tap , Settings, then Password.

2.Enter a new 4-digit PIN. This number is now your password.

3.Enable the login password by checking the Require password when device is turned on check box.

4.Save your new settings by tapping OK.

Your login password is now set. The login password screen appears each time you turn on your Pocket PC.

Adding or Removing Programs

Programs added to your Pocket PC at the factory are stored in ROM (read-only memory). You cannot remove or modify this software, and you will never accidentally lose ROM contents. Programs and data files added to your Pocket PC after factory installation are stored in RAM (random access memory). You can install any program created for Pocket PC, as long as your Pocket PC has enough memory. The most popular place to find software for your Pocket PC is on the World Wide Web.

You need to install the appropriate software for your Pocket PC on your desktop computer before you can install it on your Pocket PC.

2-20

Page 48
Image 48
Intermec 70 manual Setting a Password, Adding or Removing Programs, To set your login password