Mackie CR1604 - VLZ owner manual Free T-SHIRT Offer, Here are some guidelines

Many “authorities” tell you that shields should only be connected at one end. Some- times this can be true, but for most (99%) audio systems, it is unnecessary. If you do every- thing else correctly, you should be able to connect every component of your audio system using standard, off-the-shelf connecting cables that are available at any music store.

Here are some guidelines:

1.All return lines to the stage should be balanced. At a minimum, they should be impedance balanced. Remember that you can balance a line by inserting a piece of equip- ment inline that has a balanced output.

2.Run your own AC power wiring from the stage for the mixer and related equipment. Don’t use the “conveniently located” recep- tacle thoughtfully provided by the management for your use. You have no idea how it’s wired or grounded.

3.Carry an outlet tester, available at any well- stocked hardware store. Use it to tell you if the outlet you’re about to plug into is wired correctly. Consider it cheap insurance.

4.If you carry enough equipment that you need to wire directly into the electrical service, then use a voltmeter to ensure that the line voltage is correct, then use the outlet tester mentioned in #3, above. Do

this before you connect any of your audio equipment. Chances are that your 120V gear won’t be too happy if it sees 220V for any length of time.

5.Cables that are too long are less likely to pick up hum if you uncoil them in their entirety, and then find a place to stow the excess. Leaving the excess coiled only helps the cable pick up hum more effi- ciently.

6.Don’t run unbalanced lines to or from the stage. It’s not the impedance, it’s the fact that they’re unbalanced. It’s a good idea to use a direct box to make the unbalanced source look like a microphone.

7.For really extreme cases, you may need to insert 1:1 or isolation transformers into each return line from the front-of-house location to your amp racks.

8.Don’t cut the third pin off of the power cord. Carry some ground-lifter adapters and use them only when you have to plug into an ancient two-wire outlet.

9.If you bundle your cables together, don’t bundle AC wiring and audio wiring to- gether. Bundle them separately.

10.If your sound system insists on humming, you may need to teach it the words.

FREE T-SHIRT OFFER

We love to hear what folks have created using our mixers. If you use your CR1604-VLZ to track and/or mix a CD that is commercially released, we’ll trade you a disc for a genuine Mackie T- Shirt! By “commercially released,” we mean “offered for sale,” even if it’s just being sold out the back door of a local Karaoke joint. No hand-lettered covers, please and thank you. Furthermore, if you send us an interesting story or photograph about your production we might use it! To get your genuine 100% cotton Mackie Celebrity T-shirt, send your CD (and optional story or photo) to:

Mackie Designs

FREE T-SHIRT OFFER

attn: Communications Department

16220 Wood-Red Rd. NE

Woodinville, WA 98072

(Roll credits please) Manual written by Jeff Gilbert, based on a vignette by Ron Koliha, with tidbits borrowed from almost everywhere. Manual then defaced with proofreading pens in the hands of Mackie’s legendary Tech Support staff. Manual composed on a rinky-dink PC using a low-budget word processor, then converted to this amazing piece of work using a 13-story 1000 gigawhopper Macintosh operated by Mackie’s notorious Advertising staff. Please, feel free to let us know if you find an error or stumble over a confusing paragraph. Thank you for reading the entire manual (we know you have, or you wouldn’t be here).

Mackie Designs is always striving to improve our mixers by incorporating new and improved materials, components and manufacturing methods. Because we’re always trying to make things better, we reserve the right to change these specifications at any time, without notice.

Mackie, the "Running Man" figure, and VLZ are trademarks or registered trademarks of Mackie Designs Inc. All other brand names mentioned are trademarks or registered trademarks of their respective holders, and are hereby acknowledged.

©1997 Mackie Designs Inc.
All rights reserved.	49
Printed in the U.S.A.