ONYX FireWire Card

Getting Started

For the PC:

When connecting the Onyx FireWire card to a PC, it is necessary to first install the drivers and the control panel. The control panel allows you to set the sample rate and adjust the latency (delay) of the audio passing through the FireWire card.

Do not connect the FireWire card to your computer yet! We’ll tell you when it’s time to do that.

Installing the Drivers and Control Panel

1.Insert the CD provided with the Onyx FireWire card into your CD drive.

2.Click "Start > Run > Browse" and navigate to the CD drive. Open the "Control Panel" folder and double-click “Setup.exe.”

3.Click "OK" in the Run window. The Mackie Onyx FireWire Driver Setup win- dow opens. Click "Next" to continue or "Cancel" to close the setup program.

8

ONYX FireWire Card