AT&T EL52510, EL52500, EL52450 My cordless handset isn’t performing normally, Troubleshooting

Models: EL52350 EL52210

1 82
Download 82 pages 30.91 Kb
Page 63
Image 63

Appendix

Troubleshooting

Check that all the telephones connected to the same telephone line are hung up.

Make sure to set the dial mode to the correct setting (pulse dialing or tone dialing) for the service in your area (see Dial mode on page 14).

Eliminate any background noise. Noise from a television, radio or other appliances may cause the telephone to not dial out properly. If you cannot eliminate the background noise, first try muting the cordless handset before dialing, or dialing from another room in your home with less background noise.

If the other telephones in your home are having the same problem, the problem is in your wiring or telephone service. Contact your telephone service provider (charges may apply).

My cordless handset isn’t performing normally.

Make sure the power cord is securely plugged into the telephone base. Plug the power adapter into a different, working electrical outlet not controlled by a wall switch.

Move the cordless handset closer to the telephone base. You might have moved out of range.

Reset the telephone base. Unplug the electrical power. Wait for 15 seconds then plug it back in. Allow up to one minute for the cordless handset and telephone base to reset.

Other electronic products can cause interference to your cordless telephone. Try installing your telephone as far away from these types of electronic devices as possible: television sets, VCRs, or other cordless telephones.

OUT OF RANGE OR NO PWR AT BASE appears on my cordless handset.

Ensure that the telephone base is powered up.

Place the cordless handset in the telephone base for one minute to allow the cordless handset and base to synchronize.

Move the cordless handset closer to the telephone base. You might have moved out of range.

Reset the telephone base. Unplug the electrical power. Wait for 15 seconds then plug it back in. Allow up to one minute for the cordless handset and telephone base to reset.

Other electronic products can cause interference to your cordless telephone. Try installing your telephone as far away from these types of electronic devices as possible: television sets, VCRs, or other cordless telephones.

58

Page 63
Image 63
AT&T EL52510 My cordless handset isn’t performing normally, OUT OF RANGE OR NO PWR AT BASE appears on my cordless handset