AT&T EL52350, EL52510, EL52500 Making, answering and ending a call, Making a call, To make a call

Telephone operation

Making, answering and ending a call

Making a call

To make a call:

1.Press PHONE/FLASH, then wait for the dial tone.

-OR-

Press SPEAKER to use the speakerphone, then wait for the dial tone.

2.Use the dial pad keys to enter the telephone number.

On-hook dialing (predialing):

PHONE 0:01:30 888-722-7702

10:30PM 11/20

The screen displays the elapsed time as you talk (in hours, minutes and seconds).

1.Use the dial pad keys to enter the telephone number (up to 30 digits).

•	Press and hold REDIAL/PAUSE to insert a three-second	888-722-7702
	dialing pause (a P appears).
•	Press MUTE/DELETE or OFF/CLEAR to make
	corrections.

2.Press PHONE/FLASH to call.

-OR-

Press SPEAKER to call using the speakerphone.

-OR-

Press and hold OFF/CLEAR to return to the idle mode.

NOTES:

•Pressing PHONE/FLASH to access services from your telephone service provider does not affect the elapsed time.

•When a handset is on a call, if another handset attempts to access the directory, speed dial list or caller ID history, the screen shows NOT AVAILABLE AT THIS TIME.

Temporary ringer silencing

To silence the ringer temporarily on that handset only:

•While the telephone is ringing, press OFF/CLEAR or

MUTE/DELETE.

To silence the ringer temporarily on the telephone base:

•While the telephone is ringing, press VOLUME on the telephone base.

RINGER MUTED

This turns off the ringer without disconnecting the call. The next incoming call rings normally at the preset volume.

NOTE: Unless the ringer volume is turned off on that handset, each handset rings when there is an incoming call.

16