Answering system operation
Remote access
5. Hang up to end the call and save all messages.
There is a wallet card listing the remote commands at the back of this user’s manual. Cut it out and keep it in your wallet for quick reference.
NOTES:
•If you do not enter a valid remote access code, the system answers the call automatically.
•If the date and time is not set when a message is recorded, the system announces,
“Time and date not set” before the answering system announces the number of messages.
•If there are no messages in the answering system, the system announces, “You have no message.”
•If there are no new messages in the answering system, when you press 2 to play back new messages, the system announces, “You have no new message.”
•If you pause for more than four seconds during remote access, you hear a help menu listing all features and commands. If there is no command for another 20 seconds, the call
ends automatically.
•If the memory is full, the answering system answers after 10 rings and announces,
“Memory is full. Enter the remote access code.” Enter your remote access code to access the messages and announcements.
•When the answering system is turned off, the telephone answers after 10 rings, and announces, “Please enter your remote access code.”
52
