RECOMMENDED ACCESSORIES
IA WARNING I
Use only accessories recommended for this miter saw. Foltow instructions that accompany accessories. Use of improper accessories may cause hazards.
,The usa of any cutting too! except 10 inch saw blades which meet the requirements under recommended accessories is prohibited. Do not use accessories such as shaper cutters or dado sets. Ferrous metal cutting and the use of abrasive wheels is prohibited,
,Do not attempt to modify this toot or create accessories not recommended for use with
this tool. Any such alteration or modification is misuse and could result in a hazardous condition
leading to possible serious injury.
ACCESSORmES
Visit your Sears Hardware Department or see the Sears Power and Hand Tool Catalog to purchase recommended accessories for this power tool
IA WARNING
To avoid the risk of personal injury, do not modify this power tool or use accessories not recommended by Sears.
IA WARNING I
Read warnings and conditions on your CARBIDE TIPPED SAW BLADE. Do not operate the saw without the proper saw blade guard in place. Carbide is a very hard but brittle material Care should be taken while mounting, using, and storing carbide tipped blades to prevent accidental damage. Slight shocks, such as striking the tip while handling, can seriously damage the blade. Foreign objects in the workpiece, such as wire or nails, can also cause tips to crack or break off. Before using, always visually examine the blade and tips for bent blade, cracks, breakage, missing or loose tips, or other damage. Do not use if damage is suspected. Failure to heed safety instructions and warnings can result in serious bodily injury.
.) |
|
Blade Wrench (supplied) | Adjustable Wrench |
Philips Screwdriver | Hex Key 2_5 mm |
Combination Square
COMBINATmON SQUARE MUST BE TRUE
| Straight | edge or | ||
| a 3/4 in. board, | |||
Draw light line on board | this | edge must be | ||
perfectly | straighL | |||
along this edge. | ||||
\, |
| / |
|
L
!
Should not gap or overlap when
square is flipped over (see
dotted figure).