Mackie TT24 manual Route channel 1 to Main output, Group 1, and Aux, 3Aux, Group, and Master areas

Mackie TT24 Digital Live Console Quickstart Guide Quickstart Tutorial

Route channel 1 to Main output, Group 1, and Aux 1

9.Press and hold the L/R button in the GROUP ASSIGN area (Figure 3-3)and activate channel 1’s SELECT button.

All the channel SELECT buttons light, indicating that all channels are routed to the Main output. You should hear your mic in the main speak- ers via the master fader.

Now, let's route the mic through Group 1 instead of directly to L-R:

10.Press and hold the L/R button in the GROUP ASSIGN area and deacti- vate channel 1’s SELECT button (so it is not lit).

Channel 1 no longer sends signal to L/R.

11.Press and hold the GRP1 button in the GROUP ASSIGN area and acti- vate channel 1’s SELECT button.

The mic is now routed to Group 1.

12.Press and hold the L/R button in the GROUP ASSIGN area and activate Group 1’s SELECT button.

Group 1 is now assigned to L/R.

Use the channel, Group, and Master fader to listen to the mic signal in the L/R speakers.

Group Mute buttons

ANALOG

ANLG

MUTE

MUTE

MUTE

MUTE

CTR/

Master Center/Mono Assign button

DIGITAL

DGTL

1

2

3

4

Bank Select

MONO

GROUP ASSIGN/SELECT

Group Assign/Select buttons

5

6

7

8

L/R

RETURNS

RTNS

Master Left/Right Assign button

Master Select button

MASTER

MSTR

SELECT

SELECT

SELECT

SELECT

SELECT

Clear Solo and

Group Select buttons

SOLO

PFL

SOLO

SOLO

SOLO

SOLO

MASTER

CLEAR

PFL buttons

Group Solo buttons

TRIM

PAN

V-Pot Control

V-POT

CONTROL

METERS

HPF

Aux Mode

Aux Sends

AUX					AUX
PAN				MODE
1	2
3	4
			AUX
	SENDS
5	6

78

FX1 FX2

9 10

Figure 3-3Aux, Group, and Master areas

21