Mackie TT24 manual Aux Routing Examples

Mackie TT24 Digital Live Console Quickstart Guide Quickstart Tutorial

The EQ has six bands:

•two full parametric bands (bands 2 and 3);

•high- and low-shelf filters (bands 1 and 4);

•two Kill filters (bands 5 and 6) to remove narrow bands of unwanted frequencies. Push the Kill filter knobs to cycle through -6, -12, or -18 dB. As the amount of cut increases, the filter Q increases (i.e., bandwidth narrows). Turn the knob to adjust the frequency.

The channel aux levels are set with the channel V-Pots by pressing the desired Aux number in the V-POT CONTROL area. All 12 Aux levels for a selected channel can be set by pressing the GRP/AUX QuickMix button.

Aux Routing Examples

To send mic channel 1 to all monitors:

1.Press channel 1’s SELECT button.

2.Press the GRP/AUX QuickMix button.

3.Adjust the QuickMix knobs to set each Aux level.

To set one monitor mix:

1.Press the desired Aux number button in the AUX SENDS area.

2.Use each channel’s V-Pots to set the mix.

26