Safety Precautions

1.Follow all warnings and instructions marked on the product.

2.Slots and openings on the device are provided for ventilation. To protect it from overheating, these openings must not be blocked or covered.

3.Do not use or store this product in the environment that exceeds temperature and humidity specifications. Do not place this product near a radiator or heat register, or in a built-in installation unless adequate ventilation is provided.

4.Before cleaning, unplug this product from wall outlet. Do not use liquid cleansers or aerosol cleansers. Use a damp cloth for cleaning.

5.Do not place cords or cables where they may be walked on or tripped over.

6.Be sure to comply with any applicable local safety standards or regulations.

7.General purpose cables are provided with this product. The use of any other cables or requirements mandated by local authority is user’s responsibility.

8.Cables attached to devices in different locations with different power sources and grounding may cause hazardous voltage. Consult a qualified electronic consultant before installing the prod- uct to check if this phenomenon exists and, if necessary, take cor- rective action.

9.Never touch uninsulated telephone wires or terminals unless the line has been disconnected.

10.Avoid using telephone equipment or installing the product

during an electrical storm.

11.Never install this product, or any kind of telephone jacks, lines, network cables, and power connections in wet locations.

12.Never spill liquid of any kind on the product.

II

Page 3
Image 3
Macsense Connectivity XRouter Pro user manual Safety Precautions