English
Troubleshooting
WARNING
Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to solve a problem by following these instructions, consult your dealer for help.
Problem (General) |
| Solution |
|
| |
No power. | – | Check if the AC power cord is properly connected. |
| – | Press the 2 (STANDBY ON) to turn on the power. |
No picture. | – | Refer to your TV’s manual for correct Video In |
|
| channel selection. Change the TV channel until you |
|
| see the DVD screen. |
| – | Press the DISC button to select disc mode. |
| – | If this happens when you are turning on the |
|
| progressive scan feature, wait for 15 seconds for the |
|
| auto recovery. |
Completely distorted picture | – | If this happens when you are changing the setting of |
or black/white picture. |
| the ‘TV SYSTEM’, wait for 15 seconds for the auto |
|
| recovery. |
| – | Check the video connection. |
| – | Sometimes a small amount of picture distortion may |
|
| appear. This is not a malfunction. |
| – | Clean the disc. |
No sound or distorted sound. | – | Adjust the volume. |
| – | Check the speaker connections and settings. |
| – | Make sure that the audio cables are connected and |
|
| press the SOURCE button to select the correct input |
|
| source (for example, TUNER or TV/AUX/DI) to |
|
| choose the device that you want to hear through the |
|
| DVD system. |
| – | When playback of DTS track, press AUDIO to select |
|
| other audio track. |
There is no sound from the | – | Make sure that the center and rear speakers are |
center and rear speakers. |
| connected correctly. |
| – | Press the SURROUND button to select a correct |
|
| surround sound setting. |
| – | Make sure that the source you are playing is recorded |
|
| or broadcast in surround sound (Dolby Digital, etc.). |
|
|
|
40
