4. CONNECTIONS
4.1 Placing the Speakers
Make the following connection to ensure an optimum sound experience.
REAR | FRONT |
|
LEFT | LEFT | CENTER |
|
| FRONT |
|
| RIGHT |
| REAR | SUBWOOFER |
| RIGHT |
1.Place the main unit close to the TV.
2.Place the system speakers at normal listening
3.Place the subwoofer at the corner of the room or at least 3.3 feet (1 m) away from the TV.
DNote
•The placement diagram shown here is only a guideline that provides great system performance.You may find other placement choices that are more suitable for your room layout that provide the sound experience you enjoy.
• To avoid magnetic interference, never position the front speakers too close to your older CRT analog TV.
•The rear speakers are labeled as REAR LEFT or REAR RIGHT.
•The front speakers are labeled as FRONT LEFT or FRONT RIGHT.
•For speaker setup, refer to “Speaker Setup” on page 52.
4.2 Connection to the TV
■HDMI Connection (Supports up to 1080i, 1080p(*1), 1080p/24(*2) resolution.)
|
|
| LAN | HDMI OUT | AUDIO IN | FM ADIUDIOGITALIN |
SPEAKERS(4Ω) |
|
|
| AUX | ANT | |
|
|
|
| 75Ω | ||
|
|
|
|
|
| L |
|
|
|
|
|
| COAXIAL |
|
|
|
|
|
| R |
R | L | R | L |
|
| VIDEO OUT |
EN
HDMI OUT
HDMI cable (not supplied)
HDMI IN
No analog audio connection required.
(*1) 1080i/1080p : Outputs video data with a frame rate of 30 frames per second.
(*2) 1080p/24 : Outputs video data with a frame rate of 24 frames per second.
•Do not tilt the connector when inserting it into the HDMI jack, and make sure the shapes of the jack and the connector are matched.
•When connected to an HDCP incompatible display device, the picture will not be displayed properly.
•Use an HDMI cable with the HDMI logo (a certified HDMI cable) for this connection.
High Speed HDMI cable (also known as HDMI category 2 cable) is recommended for better compatibility.
Continued on next page.