2.Use [Î/ ï] to select “Manual”, then press [OK].
3.Use [Î/ ï] to select “IP Address”, then press [OK].
4.IP address setting screen will appear. Enter IP address with cursor buttons and number buttons.
| Network Settings (Manual) | |
|
| IP Address |
| Please input the IP Address. | |
| 0 | . 0 . 0 . 0 |
Next | Back | Clear OK |
Canceel |
|
|
|
| 5/7 |
•Enter the IP address after checking the specifications of your router.
•If the IP address is unknown, check the IP address of other devices. (e.g. PC connected via LAN cable) and assign a different number from those of other devices.
5.Use [Î/ ï/ Í/ Æ] to select “OK”, then press [OK].
6.Select “Subnet Mask”, “Default Gateway”, “Primary DNS” and “Secondary DNS” in turn, and enter each address number with cursor buttons and number buttons, then press [OK].
•Enter the DNS addresses provided by your Internet provider.
•If the DNS address is unknown, check the DNS address of other devices (e.g. PC connected via LAN cable) and assign the same DNS address.
EN
Next
Network Setting s (Manual)
Please enter your network settings.
IP Address | : xxx. xxx. xxx. xxx | |
Subnet Mask | : xxx. xxx. xxx. xxx | |
Default Gateway | : xxx. xxx. xxx. xxx | |
Primary DNS | : | xxx. xxx. xxx. xxx |
Secondary DNS | : | xxx. xxx. xxx. xxx |
Cancel
5/7
7.Use [Î/ ï/ Í/ Æ] to select “OK”, then press [OK].
8.Use [Î/ ï/ Í/ Æ] to select “Next”, then press [OK].
9.Use [Î/ ï] to select “Yes” or “No” for proxy server, then press [OK].
•If you use proxy server, select “Yes” to go to the next step.
•If you do not use proxy server, select “No” to go to step 13.
Continued on next page.