6. Use [Î/ ï] to select “Next”, then press [OK].

Access Point Setting (Auto Scan)

Please confirm the setting.

SSID

: Access 1

Security

: XXXXX

Next

WEP/WPA Key : XXXXXXX

 

Retry

 

Cancel

 

 

3/7

7.Use [Î/ ï] to select “Auto” or “Manual”, then press [OK].

•If you select “Auto”:

Follow step 4 in “Auto (Wired)” on page 56.

•If you select “Manual”:

Follow steps 3 to 12 and 14 to 16 in “Manual (Wired)” on page 57.

DNote

• The internal wireless LAN supports following specifications.

- Wireless standards

: IEEE 802.11 b/g/n

- Frequency spectrum

: 2.4 GHz

- Security protocol

: WEP / WPA / WPA2

Manual (Wireless)

Set up the connection to the wireless router manually by entering the wireless network name (SSID). In the following cases, select “Manual”(wireless) to set each setting as necessary.

- When connection test failed with the setting of “Auto Scan”(wireless).

1.Follow steps 1 to 2 in “Auto Scan (Wireless)” on page 59.

2.Use [Î/ ï] to select “Manual”, then press [OK].

3.Wireless router name (SSID) entry screen will appear. Enter the wireless network name (SSID) using cursor buttons, number buttons and color key, then press [RED].

4.Security mode select screen will appear. Select the desired security mode, then press [OK].

• If you select “None”, please go to step 6.

Access Point Setting (Manual)

Please select the security mode.

None

WEP

WPA-PSK(TKIP)

WPA-PSK(AES)

WPA2-PSK(TKIP)

WPA2-PSK(AES)

Cancel

2/7

5.“WEP / WPA Key” entry screen will appear. Enter the WEP / WPA / WPA2 key of the selected wireless network using cursor buttons, number buttons and color key, then press [RED].

•If you do not know the WEP / WPA / WPA2 key for your Wireless network, ask your ISP or the person who set up your Wireless Network.

6.Use [Î/ ï] to select “Next”, then press [OK].

Continued on next page.

EN-60