m- irst Time Setup automatically
takes care of some basic TV
control settings for you. Follow
the steps in this section to quickly
add area channel numbers into
the TV's memory, and set the TV
for your connected signal
(Antenna or Cable.)
<_ With SETUP control selected,
press (+) button (on the TV or
remote) to show the list of
SETUP items.
Press the CHANNEL • or •
(on the remote) to pick any of the
SETUP items listed.
<_ With SELECT LANGUAGE
control ON, press (+) button to
set the language of the TV's Menu
controls. (Either English,
Espanol/Spanish, or
Francais/French).
With AUTO CABLE
SELECT control ON, press (+)
button to automatically set the TV
to receive either Cable TV or
Antenna signals (connected atthe
rear of the TV).
<_ With AUTO PROGRAM
control ON, press (+) button to
automatically add Cable system or
local area channel numbers into
the TV's memory.
Reillcmber, SETUP is a
first-use, one-time operation
and will not have to be repeated
(even if the TV is unplugged.)
Press the remote's STATUS button
(or use "EXIT") to back out of the
SETUP Menu.
If the SETUP Menu disappears
and you are not finished, just press
the MENU and (+) buttons to
return to the SETUP screen.
NOTE: The "SETUP" on-screen control L
isautomatically ,selected when you first
plug-in your TV and press the MENU
button (on the"IV or theremote.
SETUP [
OSELECTLANGUAGE
PRESS+TO
SELECTLANGUAGE
IESPANOLI[FaANCAISl
PRESS*TO
OETERMINE
IFCABLE CHANNELS ARE PRESENT
TV set to receive Cable
TV supplied channels. PLEASEWAIT
CABLE CHANNELS
_lr Cll AL. -- llnlL_-t- POlli_l_ AREPRESENT
I. _ GABLAREENOHARNELSpRESENT
TV set to receive Antennlal/"
supplied channels. -I
I l SETUP
D AUTO PROGRAM
EXIT
PRESS + TO
AUTOPROGRAMCHANNELS
"RED" channel numbers I
have been added to memory ]
7