Magnavox TS 2775 owner manual Work, YES no control for correct position

lease make these simple checks before calling for

service. Theses tips can save you time and money since charges for

TV installation and adjustment of customer controls are not

covered under your warranty.

NO Power

No Picture

No Sound

Remote Does Not

Work

CAUTION: A video source (such as a video game, Com_pact Disc Interactive- CDI, or TV information channel) which shows a constant non-moving pattern on the TV screen, can cause picture tube damage. When your TV is continuously used with such a source the pattern of the non-moving portion of the game (CDI, etc.) could leave an image permanently on the picture tube. When not in use, turn the video source OFF.

Regularly alternate the use of such video sources with normal TV viewing.

outlet and push POWER button again.

i heck the TV power cord. Unplug the TV, wait 10 seconds, then reinsert plug into Check to be sure outlet is not on a wall switch.

antenna plug on the TV?

Check the CABLE/YES NO control for correct position.

iCheck INPUTantenna controlconnectionsfor correcton thepositionrear of. theVCRTV-AUX. Are positionthey properlywithoutsecureda signalto thesource will result in a blank screen.

Check the VOLUME buttons.

Check the MUTE button on the remote control.

Check the TV SPEAKER switch on the rear of the TV. OFF position will eliminate sound at the set.

If attempting auxiliary equipment hook-ups, check audio jack connections.

Check TV-VCR-CBL "System" buttons on the remote. Press the remote's TV System button to send commands to the TV.

Check batteries. Replace with AA Heavy Duty (Zinc Chloride) or Alkaline batteries if necessary.

Clean the remote and the remote sensor window on the TV.

Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert plug into

outlet and push POWER button again.

Check to be sure TV outlet is not on a wall switch.

TV Disolavs Wron

Channel or NO

Channels Above

Add desired channel numbers (CHANNEL control) into TV memory.			i
i Repeat	channel	selection.
Check	CABLE!	YES NO control for correct position.

This TV is equipped with protective circuitry that shuts the TV off in case of moderate power surges. Should this occur turn the TV back on by pressing the POWER button once or twice, or unplug (wait 10 seconds) and then replug the power cord at the AC outlet. This feature is NOT designed to prevent damage due to high power surges such as those caused by lightning, which is not covered by your warranty.

Cleaning and Care

•To avoid possible shock hazard be sure the TV is unplugged from the electrical outlet before cleaning.

•When cleaning the TV screen take care not to scratch or damage the screen surface (avoid wearing jewelry or using anything abrasive). Wipe the front screen with a clean cloth dampened with water. Use even, easy, vertical strokes when cleaning.

•Gently wipe the cabinet surfaces with a clean cloth or sponge dampened in a solution of cool clear water. Use a clean dry cloth to dry the wiped surfaces.

•Occasionally vacuum the ventilation holes or slots in the cabinet back.

•Never use thinners, insecticide sprays, or other chemicals on or near the cabinet, as they might cause permanent marring of the cabinet finish.

27