![](/images/new-backgrounds/1230003/2300039x1.webp)
ur Cable IV input
nto your home may be
a single (75 ohm) cable, or a Converter Box
installation. In either case the connection to the TV is very easy. Just put the threaded end of the cable signal to the TV's antenna plug and screw it down tight.
your Cable TV
signal is a single round cable (75 ohm) then you're ready to connect to the TV.
If you have a Cable TV Converter Box:
Connect the Cable TV signal to the Cable Signal IN(put) plug on the Converter.
Cable TV Company
_ Connect Cable TV cable
to ANTENNA plug on the TV.
If you have a Converter Box: Connect the OUT(put) plug on the Converter to the ANTENNA
plug on the TV.
Cable TV Signal Input
Remcnlber,
set the TV for the type signal you've just connected (see page 7).
To select only the numbers on your Cable Sysetm see "Auto Program"
(page 9). If you use a Cable Converter box, set the TV to the
same channel as the converter's CH 3/4 switch (on the rear of
Cable TV Converter
Box Connection
the converter.)
combination (outdoor or indoor) antenna
receives normal broadcast channels
If your antenna has a round cable (75 ohm) on the end, then you're ready to connect it to the TV.
If your antenna has flat twin- lead wire (300 ohm), you first need to attach the antenna wires to the screws on a 300 to 75 ohm adapter.
_Push the round end of the
adapter (or antenna) onto the ANTENNA plug on the rear of the TV. If the round end of the antenna wire is threaded, screw it down tight.
Relncnibei,
be sure to set the TV for the type signal you've connected (see "SETUP" on page 7 of this manual).
To set the TV to select only the channel
antenna is easy since there is only one antenna plug
300 to 75f_ | Back of TV |
| |
Adapter |
|
(483521827003) |
|
Combination VHF/UHF Antenna
(Outdoor or Indoor)
Round Cable
75ff2 Ohm
numbers in your area see haw to "Program" or "Add" channels in memory on page 9.
To order any optional accessory contact your dealer or call the toll-
free accessory ordering number :
rl'_w basic Antenna, or
• Cable TV, to VCR to TV connection is shown to
the right. For more information on other hookups (possible when Cable Converter boxes are included) refer to your accessory VCR and Cable Converter Owner's Manual for details.
<• Connect the OUT TO TV
r | your |
|
|
| [<_M Refer | to the Owner's |
[Antenna or Cable TV signal |
| plug on the VCR to the | anual included with | |||
| ANTENNA | plug on the TV | your VCR for other | |||
[to the IN FROM ANT(enna) |
| |||||
| (connecting | cable supplied with | Iconnections and TV/VCR | |||
Iplug on the VCR. |
|
| ||||
|
| Ithe VCR.) |
| Ioperating | details. | |
|
|
|
| |||
Outdoor VHF/UHF | 300 to 75_ | Ohm |
| Back | of TV | |
|
|
|
|
| ||
Antenna | _ | Adapter | _ _ |
|
|
|
V_k. IN FltO_ ^Nx
/
"VCR
Round Cable
75f2 Supplied with VCR
Cable TV signal
_J