OeTE: If you went through tup (see page 7), this task
has already been completed for
you.
You need to make sure that the TV
is set to pick up either Cable TV
stations or Antenna signals. In
other words, the TV needs to know whether you have connected a Cable TV signal or a normal antenna to its ANTENNA plug.
Press MENU (M) button on
the remote, then press the CHANNEL • or • buttons (or the MENU • or • buttons on the
TV) to select the word CABLE with the TV's
Press the VOLUME (+) or
YES- If you DO have Cable TV
connected to the "IV. Channels
NO- If you have an Antenna connected to the TV.
Channels
<._ Press STATUS to clear the screen
Try it out. Press
CHANNEL •• buttons
and scan the channels. CH•• on
the remote works only after STATUS button is pressed (or Menu times out.)
Remember, the TV has been set at the factory to select certain channel numbers. See the following page on how to set the TV to select the channels in your area.
8
