33
TV Code Setting
Bo=o Ioo • •••rio••o•••••• • •oioo •o• *ooo* oleo•co•co••••••••••••••••coo•• • o••••••••• • •lQoQooooioooeoi• o• • • • *o o• •o••omooooooooo•4•t••••=•
O c:=:_ 0
1
Press the TV button, then the POWER but-
ton, to see if the remote control operates
your TV. If it doesn't, go to step 2.
4
Press and release the TV button.
5
Use the Number buttons to enter your TV's
code (from the list below).
Remote Control
6
Try step 1again. If
the remote control
works your "gV,
you're finished. If
the remote control
still do*esn't work
your TV, repeat
steps 2 - 5 using
another code.
Press and release
the MUTE button.
2
Find the brand
of your TV on
this list.
TV CODES
MAGNAVOX ..... 01
GE ............ 04
GOLDSTAR ..... 15
GOLDSTAR ..... 16
GOLDSTAR ..... 17
HITACHI ........ 12
JVG ........... 11
MITSUBISHI ..... 13
PANASONIC .... 02
PANASONIC .... 03
PHILCO ........ 01
PHILIPS ........ 01
RCA ........... 04
SAMSUNG ...... 14
SANYO ........ 10
SHARP ........ 06
SHARP ........ 07
SONY .......... 08
SYLVANIA ...... 01
TOSHIBA ....... 09
ZENITH ........ 05
•Although the remote control that comes with your VCR will work most
Magnavox TVs, as well as many TVs sold under other brand names, itis
possible that the remote control will not operate your TV.
•If you had to program the remote control to operate your TV here, whenever
you replace the batteries inthe remote control, you will have to program the
remote control again.
! Your VCR remote control may be able to
: operate your TV. If the remote control
: doesn't operate your TV now, find your
! brand of TVon the list at the left, then fol-
ilow the steps below to program your remote
icontrol accordingly.
! Point the remote control at your TV and
i press the TV button. Then, press the
:POWER button. If your TV comes on, try
:the other TV buttons (see pages 14 -15for
!details). If your TV doesn't come on, or if
:the other buttons don't work, go to step 2.
! Find the brand of your TV on the list at the
• left, and remember the two-digit number to
the right of it.
3
Press and release the MUTE button.
4
Within 30 seconds after releasing the
MUTE button, press and release the TV
button.
5
Within 30 seconds after releasing the TV
button, use the Number buttons to enter the
code for your TV brand. For example, if
you have a Zenith TV, press Number but-
tons 0, 5.
6
Try step 1again. If the remote control works
your TV, you're finished. If the remote con-
trol still doesn't work your TV,repeat steps 2
- 5, using another code.

There is no

guarantee that the

remote control will

work your TV.

n _