Magnavox VRU344AT manual Contd, Number Buttons

8

Press the Number 1 button to record in SP speed, press the Number 2 button to

record in LP speed, or press the Number 3 button to record in SLP

speed. For details, see page five. You

cannot use the (Tape) SPEED button at this time.

Timer Recording

11

If you want to program another timer recording, press the MENU button. Repeat steps 2 - 10. If you don't want to program another timer recording, go to step 12.

POWER

12Button

21

(cont'd

VCR

Timer

Light

EL	10
TIME OFF	11:00 PM
T ON	_:_1 PM

TO CORRECT PUSH CLEAR

"%_ END PUSH EXIT

9

Press two Number buttons for the month and the day you want to record the program. For example, for July 10, 1996, press 07, 10. The day of the week and the year will be displayed automatically (you cannot program the VCR to record more than one year in advance).

	CHANNEL	l0
I	TCI_ ON	09:30 Pld
I	TIME OFF	11:00 Pld
i	REC SPEED	SiP

ISTART DATE 07/10/_ WED.

kTO CORRECT PUSH CLEAR

_TO END PUSH EXIT

10

Press the STATUS/EXIT button.

PROGRAM WAS COMPLETED PLEASE TURN OFF VCR FOR

TIMER RECORDING will appear on- screen (if PROGRAM NOT COM- PLETED appears, try again from step 1). In three seconds the on-screen dis-

play will disappear. Now, go to steps 11 and 12.

Turn off the VCR power. The Timer light will appear. The VCR must be turned off for a timer recording to take place. If you forget to turn the VCR off, PLEASE TURN OFF VCR FOR TIMER RECORDING flashes on your TV screen two minutes before a timer recording starts. You can

remove it by pressing the CLEAR but- ton.

The VCR must be off for a timer recording

to take place! Make sure there

is a tape in the VCR.

POWER Button

i

MENU Button--

tS®'_

Number Buttons--

STATUS/EXIT

Button

CLEAR Button

{::_::_ c_

O0 OO

Remote Control

•CLASH mayflash on the screen when you finish setting a timer

recording. This means that the timer recording you just pro- grammed and another timer record- ing overlap, and thus the current timer recording will not be carried out. In this case, cancel one of the overlapping timer recordings.

•If the preset time for a timer record- ing comes up during an OTR, the OTR has priority.

•To stop a started timer recording,

Making Corrections

I.While the screen you want to change is displayed, press the CLEAR button until the cursor is flashing on the item

you want to change. Then enter the correct information.

2.Continue to do this until all information is correct.

3.Press the STATUS!EXIT button to exit.

Note: You can exit the Program

review at any time by pressing

the STATUS/EXIT button.

press the STOP/EJECT button on the VCR.

•If the power fails for more than one

minute, programmed timer record- ings will be lost. When you use the VCR with the auto clock function set to OFF, repeat the steps on page I0

before re-programming the timer recordings.

Please see page 35 for more notes.