6

Hooking Up Your VCR

The basic VCR/TV connection -antenna/cable to VCR to TV -is shown below. For other hookups, including those that use
cable converter/descrambler boxes, see pages 36 - 39.
1
Disconnect the antenna orcable from your T¥.
Back of TV
\\\ fl # //// ..
\_///// _Indoor Antenna (example only)
IOutdoor Antenna _

m" L"t n

Antenna Jack
2
Connect the antenna/cable
to your VCR.
\\\ D// IIII ,,
_ANT(enna). IN(put) Jack
__B- ........... OUT(pu,,
Jack
3
Connect your VCR to your
TV using the black RF
coaxiol cable (supplied).
Make sure both the TV and
the VCR are plugged in.
4
Select channel 3 or 4.
Set the CH3/CH4 switch on the back of the
VCR to CH3 or CH4, whichever channel is
not used orleast used in your area. To oper-
ate your VCR with your TV, set the TV tothe
same channel. For example, when playing a
tape, if the CH3/CH4 switch is set to CH3,
the TV should be on channel 3.
Antenna or Cable
IBack of VCR
Wall Outlet
Back of TV
ANT(enna).
/IN(put) Jack (example only)
i_-_ _'//OUT(put) Jack
_coaxiaicable I_ \
(supplied) J cVomHbFi/_JnaHtiFon
Antenna Jack
Wall
Outlet
TV
/\
IIOO01109BOIlOg e'"o
ISwitch