28

Channel Memory (cont'd)

Adding/Deleting Channels
1
Press the MENU button, then press the
Number 3 button to select TUNER SET
UP.
2
Press the Number 4 button to select
ADD/DELETE CH.
EoLECTCHANNELNUMBER_"_
ENDPUSH EXIT J
3
Enter thedesired channel number (see
"Number Buttons" on page 14).
CH12
3SE'EOT,NO_"E.O.
ENDPUSH EXIT

:4

:Press the Number 1 button to add
: that channel or theNumber 2 button
:to delete that channel. Press the
" Number 3 button to leave that chan-
• nel unchanged and select another
: channel. If you do notmake a •
: choice within five seconds, you will :
i return to the previous menu display.
• Press the STATUS/EXIT button to •
i exit. The programming of the chan- !•
:nel you added or deleted will appear, i
: Numberi Buttons--STATUS/EXIT
Button
Remote Control
_ ® -..6_
/../_"x o._
MENU
Button
iReviewing Programmed Channels
i 1.Press the MENU button to bring up the main menu display.
" 2. Press the Number 3 button to select TUNER SET UP.
:3. Press the Number 5button to select CHMEMORY REVIEW. Alist of
:programmed channels will appear on-screen.
:•If all the programmed channels don'tfit on the screen, press the Number 1
i button to see the remaining channels. Then press the Number 2button to
• return to the first screen of channels.
i•If you do not press any buttons within 10 seconds, you will return to the
"previous menu display.
:4. Press the STATUS/EXIT button twice toexit.

Language Selection

Follow the steps below to change the lan-
guage of the on-screen displays.
1
Press the MENU button, then press the
Number 2 button to select VCR SET UP.
Press the Number 4 button to select LAN-
GUAGE.
2
Press theNumber 1 button ifyou want the
on-screen displays in English. ON will
appear to the right of ENGLISH on-screen.
Press the Number 2 button if you want the
on-screen displays in Spanish. SI will
appear to the right ofESPAI_IOL on-screen, i
3 "Number
Buttons
tg_®
r5 ® -_-
/__.._....I_
o c::::_ 0
00000
O0 00
Remote Control
MENU
Button