19

One Touch Recording-

Use the CHAN-
NEL (Up/Down)
buttons or the
Number buttons to
select the channel
you want to
record.
Remote Control
Press the
REC(ord)/OTR
button repeatedly
until the desired
recording length
appears in the
upper left comer
of the screen.

.0.

t5 ® -:o=

®oSl

@@®_J
_aotn_t mA_ ctt_
0c:=:3 0
•To check the time remainingforan OTR after the OTR has been set, press
the STATUS/EXIT button.
• To change the recording length while an OTR is in progress, press the
REC(ord)/OTR button until the desired length appears on-screen.
• If you begin an OTR when a recording is paused, the OTR will begin.
• You can not pause recording (for example, during commercials) during an
OTR.
• If the preset time for a timer recording comes up during an OTR, the OTR
has nrioritv.
i The one touch recording (OTR) function
i allows you to program an immediate timed
. recording 30 minutes to four hours long
:without setting the timer. Before you
:begin, make sure:
•: • Channels have been programmed.
i • The desired recording speed (SP,LP,
SLP) has been selected with the (Tape)
:SPEED button.
i • There is a tape in the VCR. Make sure
the tape's record tab is intact and the tape
i islong enough to record the program(s).
$The VCR is in VCR position.
iStarting an OTR
1
:Use the CHANNEL (Up/Down) buttons or
" the Number buttons to select the channel
! you want torecord.
i2
i Press the REC(ord)/OTR button repeatedly
: until the desired recording length (30 min-
i utes to four hours) appears in the upper left
! comer of the screen. Recording will begin
immediately.
:Stopping an OTR
To stop an OTR before recording is fin-
ished, press the STOP button or the
POWER button. To cancel the OTR but
continue recording, press the
REC(ord)/OTR button until REC appears in
the upper left comer of the screen.