Blade Case Complete | Makita BHS630 guide

P 9/ 16

[3]-6. Blade Case Complete

(1)Remove Lever 55 and M6x85 Hex bolt as per the top right drawing in Fig. 5. Now the machine is free from Depth guide.

(2)Make the machine free from Angular guide as drawn in Fig. 8. Now the machine is separated from Base completely.

(3)Separate Blade case as per the upper left, upper right and lower left drawings in Fig. 10.

(4)Disassemble Safety cover and Gear section from Blade case as drawn in Fig. 12.

Fig. 12

1.Remove retaining ring WR-26 and Flat washer 26. Use 1R003 equipped with Claw of 1R212, when removing retaining ring WR-26.

Hold the Retaining ring with your gloved hand so that it does not spring when removing.

2. Remove Safety cover, Tension spring 4 and Thickness ring.

Tension spring 4

Safety cover

Retaining	Flat washer 26
ring WR-26

3.Remove the parts of LED section, Rubber sleeve 6, M5-8 Hex socket

Cover

LED

Connector

Connector box

M6 Hex nut

M5-8 Hex socket head set screw

Thickness

4.Remove Bearing box (Gear section) by unscrewing four M4x16 pan head screws.

M4x16 Pan head screw (4pcs.)

Gear section

Gasket

Rubber sleeve 6