P 10/ 15

Repair

[3]DISASSEMBLY/ASSEMBLY

[3]-5. Hammer section (cont.)

DISASSEMBLING

(4)Disassemble Hammer section as drawn in Fig. 17.

Fig. 17

 

Compression spring 26

Hammer

Cup washer 14

 

Steel ball 3.5 (24 pcs.)

Flat washer 24

Spindle

ASSEMBLING

Assemble Hammer section by reversing the disassembly procedure. (Refer to Fig. 17) Note for Assembling:

Before putting Flat washer 24 in Hammer, make sure that twenty-four Steel balls 3.5 are put in the groove of Hammer as shown in Fig. 18.

Fig. 18

Hammer and Steel balls 3.5, viewed from above

Hammer

There will appear a space equivalent to one Steel ball 3.5 in the groove of Hammer when twenty-four Steel balls 3.5 are put in place.

Page 10
Image 10
Makita BTW104, BTW074 dimensions Disassembly/Assembly