Spare parts
Reliable 
Only original spare parts and accessories guarantee the highest quality in material, dimensions, function and safety.
Original spare parts and accessories can be obtained from your local dealer. He will also have the spare part lists to determine the required spare part numbers, and will be constantly informed about the latest improvements and spare part innovations.
Please bear in mind that if parts other than original MAKITA spare parts are used, this will automatically invalidate the MAKITA product guarantee.
Guarantee
MAKITA guarantees the highest quality and will therefore reimburse all costs for repair by replacement of damaged parts resulting from material or production faults occurring within the guarantee period after purchase. Please note that in some countries particular guarantee conditions may exist. If you have any questions, please contact your salesman, who is responsible for the guarantee of the product.
Please note that we cannot accept any responsibility for damage caused by:
•Disregard of the instruction manual.
•
•Incorrect carburetor adjustment.
•Normal wear and tear.
•Obvious overloading due to permanent exceeding of the upper performance limits.
•Use of guide bars and chains which have not been approved.
•Use of guide bar and chain lengths which have not been approved.
•Use of force, improper use, misuse or accidents.
•Damage from overheating due to dirt on the fan housing.
•Work on the chain saw by unskilled persons or inappropriate repairs.
•Use of unsuitable spare parts or parts which are not original MAKITA parts, insofar as they have caused the damage.
•Use of unsuitable or old oil.
•Damage related to conditions arising from lease or rent contracts.
Cleaning, servicing and adjustment work is not covered by the guarantee. All repairs covered by the guarantee must be performed by a MAKITA service center.
Troubleshooting
Malfunction | System | Observation | Cause |
|
|
|
|
Chain does not run | Chain brake | Engine runs | Chain brake actuated. |
|
|
|
|
Engine does not start or | Ignition system | Ignition spark | Malfunction in fuel supply system, com- |
only with difficulty |
|
| pression system, mechanical malfunction. |
|
| No ignition spark | Switch on STOP, fault or |
|
|
| wiring, plug cap or spark plug defective. |
| Fuel supply | Fuel tank is filled | Choke in wrong position, carburetor defective, |
|
|
| suction head dirty, fuel line bent or interrupted. |
| Compression | Inside | Cylinder base packing ring defective, radial |
| system |
| shaft packings defective, cylinder or piston rings |
|
|
| defective |
|
| Outside | Spark plug does not seal. |
| Mechanical | Starter does not engage | Spring in starter broken, broken parts |
| malfunction |
| inside the engine. |
|
|
|
|
Warm start difficulties | Carburetor | Fuel tank is filled | Wrong carburetor adjustment. |
|
| Ignition spark |
|
|
|
|
|
Engine starts, but | Fuel supply | Fuel tank is filled | Wrong idling adjustment, suction head or |
dies immediately |
|
| carburetor dirty. Tank venting defective, fuel line |
|
|
| interrupted, cable defective, STOP switch |
|
|
| defective. Starting valve dirty (DCS 431). |
|
|
|
|
Insufficient power | Several systems | Engine is idling | Air filter or prefilter dirty, wrong carburetor adjust- |
| may be involved |
| ment, muffler clogged, exhaust channel in cylin- |
| simultaneously |
| der clogged, spark arrester screen clogged. |
|
|
|
|
No chain lubrication | Oil tank/pump | No oil on the chain | Oil tank empty. |
|
|
| Oil guide groove dirty. |
|
|
| Oilpump adjusting screw incorrectly adjusted. |
|
|
|
|
30
