PUTTING INTO OPERATION
CAUTION:
STOP
A
Before doing any work on the guide bar or chain, always switch off the engine and pull the plug cap off the spark plug (see "Replacing the spark plug"). Always wear pro- tective gloves!
CAUTION:
Do not start the saw until it has been completely assem- bled and inspected!
4
B
1 2
3
Mounting the guide bar and saw chain
Use the universal wrench delivered with the chain saw for the following work.
Put the chain saw on a stable surface and carry out the following steps for mounting the guide bar and chain:
Disengage the chain brake by pulling the hand guard (1) in the direction of the arrow.
Unscrew retaining nut (2).
Spread the sprocket guard (3) slightly, push it out of the mounting (4) and remove it.
Remove the transport cover (5).
Turn the chain tensioning screw (6) to the left
5
C
8 | 7 | 6 |
Position the guide bar (9). Make sure that the pin (10) of the chain tightener is in the hole on the guide bar.
9
D
10
18