Remove and check the carbon brushes regularly. Replace when they wear down to the limit mark. Keep the carbon brushes clean and free to slip in the holders. Both carbon brushes should be replaced at the same time. Use only identical carbon brushes.
Use a screwdriver to remove the rear cover.
| 1. | Screwdriver |
| 2. | Rear cover |
1 | 2 |
|
007651 |
|
|
Take out the worn carbon brushes, insert the new ones and secure the rear cover.
1. Carbon brushes
1
007652
To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized Service Centers, always using Makita replacement parts.
ACCESSORIES
CAUTION:
• These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.
If you need any assistance for more details regarding these accessories, ask your local Makita Service Center.
•
•
•Mini planer blade
•Sharpening holder assembly
•Blade gauge
•Set plate set
•Edge fence (Guide rule)
•Dressing stone
•Dust bag assembly
•Elbow
•Socket wrench
•Chamfering rule assembly
11
