3This section describes the
TURNING ON THE RECEIVER
When the receiver is in standby the 
symbol on the front panel is illuminated red. To turn it on, press the 
button on the remote control or on the front panel of the receiver. The power symbol and ring around it become illuminated blue when the receiver is on.
You can turn off the Plaza HDR•S, so it goes into standby, by pressing the 
button on the remote control or the 
button on the receiver. The Plaza HDR•S uses less power when in standby.
HINT: You should leave the Plaza HDR•S receiver plugged in with the socket switched on, at all times (except when there is lightning – see Appendix A). When you are not using the receiver, put it in standby by pressing the 
button on the remote control or the 
button on the front of the receiver.
HINT: The Plaza HDR•S receiver will automatically switch to standby if it is not used for a long time. This feature can be disabled – see the Advanced Use section of this guide.
CHANGING CHANNELS
Step through the channels by pressing the 
buttons on
the remote control. Pressing the 
button will select the next
channel in the channel list. Pressing the 
button will select the previous channel in the list.
If you know the channel’s number, you can switch directly to the channel you want by using the number buttons on the remote control. As you enter a channel number, each digit appears at the top left of the screen to show the number button you have pressed. All the Freesat channel numbers have three digits and the first channel is 101. The radio stations are stored from channel number 700.
Press the 
button to switch from the channel you are currently watching to the channel you were watching before.
HINT: There are some channel numbers missing in the channel list because spaces are left for future channels to join Freesat.
HINT: If you enter a number that does not exist, the channel will not change.
15
