Press 
or 
to highlight the “Next” box and then press 
to display the next installation screen. If after doing this you lose the
picture on your screen press 
to return to the first installation screen using the default resolution of 720p (supported by all HDTVs).
The signal check screen shows the strength and quality of the Freesat signal received from your satellite dish. The signal lock is successful if both LNB inputs are receiving a valid signal. If the second input is not receiving a valid signal, you will be able to proceed with installation but recording functions of the receiver will not work correctly and a warning message will display. If the first input is not receiving a valid signal, the signal lock will fail and you will not be able to proceed. Check the satellite dish connections at the back of the receiver (switch the receiver off and reconnect the cables if necessary). If the connections are OK, consult your retailer or installer.
When the signal lock shows “Successful”, you can continue to tune in the receiver. Press 
to proceed.
Enter your postcode using the number buttons on the remote control. You do not need to enter a space. Press the 
button when you have entered your postcode, and then press 
again to proceed.
HINT: Enter your postcode with the number buttons by pressing the correct button on the remote a number of times to produce the required letter (printed on each button), or number, in the same way as ‘texting’ with a mobile phone. For example, for an ‘S’, you would press
the 
button four times. If you make a mistake, the 
button deletes the last character entered.
13
