![](/images/new-backgrounds/1125915/12591579x1.webp)
TUNING IN NON-FREESAT CHANNELS (continued)
If you choose a manual scan, you should enter the frequency and symbol rate of the transponder to scan, using the number buttons, and its polarization, modulation and broadcast system by using the or buttons. You can move between the five items using the and
buttons. When you have entered the tuning information, press
to start the scan.
HINT: The tuning information for
If you choose an automatic scan, just press to start the scan.
The Plaza HDR•S will take a few seconds to complete a Manual Scan and several minutes to finish an automatic scan. While it is scanning, the receiver displays the number of TV and radio channels found so far. When it is finished, the receiver will display a list of all the channels found.
You can choose to watch a and
buttons to highlight the channel you want and pressing
, or return to watching TV
by pressing
or
.
WATCHING NON-FREESAT CHANNELS
While watching a non-Freesat channel, you can step through the
other or
buttons. You cannot enter a
Freesat channel, but you can press the button to switch to the channel you last watched, whether it was a Freesat or
HINT:
You can browse through the or
or
to display the browsing bar and then press the
or
buttons to see what is showing at the moment on any of the other
to see the programmes on next.
40