PAGE 12

CONNECTIONS

ConnectingtoaTV

Connect the DVD player to your TV

DIGITAL

COMPONENT

AUDIO

OUT

VIDEO OUT

OUT

COAXIAL

C B

L

 

C R

R

S-VIDEO

Y

VIDEO

OUT

 

OUT

Audio/Video cable (supplied)

To AUDIO OUT (L/R)/VIDEO OUT

To S-VIDEO OUT

To COMPONENT

 

 

VIDEO OUT

For using COMPONENT VIDEO OUT and S-VIDEO OUT jacks, you must set “TV Output Select” at the SETUP menu. (See page 35.)

If the TV has an S-video input, connect the

DVD player with the S-video cable.

To video input

To audio inputs

Video cable (Y, CB, CR) (not supplied)

S-video cable (not supplied)

To S-video input

The component video connections supply component signals (Y, CB, CR) to video equipment equipped with component video input connections. If your TV receiver has component video inputs, it is highly recommended that you use a component video cable (not supplied) to obtain the full benefit of DVD’s superb picture quality. (The picture quality obtained using component video is even better than that of S-video.)

TV or monitor with audio/video inputs

Notes

Refer to the owner’s manual of your TV as well.

When you connect the DVD player to your TV, be sure to turn off the power and unplug both units from the wall outlet before making any connections.

Connect the DVD player to your TV directly. If you connect the DVD player to a VCR, the playback picture will be distorted because DVD video discs are copy protected.

Warning

Do not set the Digital Audio Output of this DVD player to “Dolby Digital” unless you are connecting the DIGITAL AUDIO jack of this DVD player to an AV decoder that has the Dolby Digital (AC-3) decoding function. High volume sound may damage your hearing as well as the speakers. (Refer to “Selecting Digital Audio Output” on page 36.)

Page 12
Image 12
Marantz DV3100 manual Connecting to a TV, Connect the DVD player to your TV