4 Press the channel (5,∞) buttons to select current hour.
●If you hold the 3 button, the hour display is changed in the sequence of AM 1 ➔ AM 2
➔....PM12 ➔ PM 1 .... ➔ AM 12, and changed in the reverse sequence for ∞ but- ton.
●Select [AM 10].
5 Press the volume (3) button.
Clock | 10:00AM |
TV 3 Vol 30 Run | |
Auto Off | : Hold |
|
|
Use 5∞2 3 And ENTER
6 Press the channel (5,∞) buttons to select current minute. And press the ENTER button.
●If you hold the 3 button, the minute display is changed in the sequence of 00 ➔ 01 ➔ 02
...58 ➔ 59, and changed in the reverse sequence for 3 button.
●Select [30] and press the ENTER button to complete the setting.
●Time is progressed from the point of press- ing the ENTER button.
●Press the ENTER button again and the screen display is disappears.
To check current channel, time and
sound status (stereo or dual)
●Press the ENTER button.
| ST.SAP 7 |
|
|
| current channel | ||
|
|
|
| ||||
|
|
|
|
|
|
| current sound |
|
|
|
|
|
|
| status |
| 10:30AM |
|
|
|
| current time | |
|
|
|
| ||||
|
|
|
|
|
|
|
|
●Press the ENTER button again to release.
* Current time is not displayed if current time is not set.
* Stereo or dual sound is displayed only when receiving the correspondent input signal.
*Above displays disappear after a few sec- onds.
CLOCK | SETTING |
|
|
35
