Dialog Level

Default settings are underlined.

 

 

Sets the output level to clarify the dialogue output from the center channel.

Setting items

Setting details

 

 

Level

–12dB – +12dB (0dB)

Subwoofer Level

Default settings are underlined.

 

 

This setting adjusts the volume level for the subwoofer.

Setting items

Setting details

 

 

Subwoofer

On : The subwoofer is used.

Turn subwoofer output on Off : The subwoofer is not used.

and off.

NOTE

 

 

This can be set when the sound mode is “DIRECT” and “PURE

 

Audio

Surr.Parameter

Default settings are underlined.

 

 

You can adjust the surround audio sound field effects to match your preferences.

The items (parameters) that can be adjusted depend on the signal being input and the currently set sound mode. For details on the adjustable parameters, see “Sound modes and surround parameters” (vpage 126).

NOTE

•Some setting items cannot be set while playback is stopped. Make the settings during playback.

•When the sound mode is “PURE DIRECT”, you cannot set the surround parameters.

Setting items

Setting details

 

 

Home Theater EQ

On : “Home Theater EQ” is used.

Gently softens the upper

Off : “Home Theater EQ” is not used.

treble range of movie soundtracks to reduce possible harshness and improve clarity.

instructions Advanced instructions Basic

 

DIRECT” (vpage 72) and the “Subwoofer Mode” (vpage 109) is

 

“LFE+Main”.

Subwoofer Level

–12dB – +12dB (0dB)

This setting adjusts the

 

volume level for the

 

subwoofer.

 

Loudness Mngmt This can be set in the Dolby TrueHD mode. This sets whether to output as specified in “Dynamic Comp.” or output directly without compressing the dynamic range of audio recorded in the disc.

On : Outputs using the settings made in “Dynamic Comp.” and “Dialogue Normalization” (vpage 116) are enabled.

Off : “Dynamic Comp.” settings and “Dialogue Normalization” are disabled, and the signals on the disk are output as is.

Information

Dynamic Comp.

Auto : Automatic dynamic range compression on/off control according to

Compress dynamic range

source.

(difference between loud

Low / Medium / High : These set the compression level.

and soft sounds).

Off : Dynamic range compression is always off.

 

You can set “Auto” only for the Dolby TrueHD source.

 

 

Low Frequency

–10dB – 0dB

Adjust the low-frequency

 

effects level (LFE).

For proper playback of the different sources, we recommend setting

to the values below.

 

•Dolby Digital sources : 0dB

•DTS movie sources : 0dB

•DTS music sources : –10dB

v See overleaf

94

DVD